Laser safety glasses for fiber and C02 lasers

Laser classes: A safety guide for your laser marking machine

Discover laser classes and the hazard classification system for safe laser use.

Lasers are subject to a rigorous classification system according to their hazard level. This laser class system, established by the IEC (International Electrotechnical Commission), designates a certain number of standards and aims to ensure the safe use of these devices. But what exactly are laser classes, and how do they apply to laser engravers and cutters?

Class 1 lasers

Class 1 lasers are not considered dangerous for two reasons:

  • The laser radiation emitted is not powerful enough to cause damage.
  • The laser is confined within a secure enclosure, ensuring high safety during use.

While Class 1 lasers can be powerful, they are generally confined within specific enclosures, preventing direct radiation exposure. As a result, the safety of operators and users is guaranteed.

Given this non-exposure at the time of engraving, it is unnecessary to wear safety glasses when handling class 1 lasers.

Barcode scanner laser

Class 1M lasers

Class 1M lasers emit visible light in a wavelength range from 302.5 nm to 4,000 nm. When there is no reduction in beam cross-section, these lasers present no danger to the human eye.  

Note: Class 1M lasers are commonly used for barcode scanners, notably at supermarket checkouts.  

LW3 - Gravotech

Closed-door laser stations

These Class 1 lasers are designed to meet safety requirements. They can be adapted to any environment: factory, workshop, front and back office...

Maximum safety: the laser cuts out instantly if the door is opened, thanks to a dedicated sensor.  

And a viewing window is designed to follow the engraving process.

Discover our laser stations
Mini-inline and fiber laser mounted for automotive part marking

Lasers that can be integrated into Mini-inline solutions

With this type of laser, a protective sleeve is integrated to ensure safe laser marking. It is placed between the laser marking machine and the workpiece.

The chamber is made of anodized aluminum to isolate the laser beam from the working environment. Safety sensors ensure the presence of the Mini-inline and the part to be marked.

Discover the Mini-inline

Class 2 lasers

Laser pointer

Class 2 and 2M lasers

Class 2

Class 2 lasers emit visible light in the wavelength range from 400 nm to 700 nm, with a power of less than 1 mW.

These lasers, such as the laser pointers used on chalkboards, are considered eye-safe as long as the beam is not viewed for prolonged periods. Please note: the labels and instructions for the use of these lasers indicate that you should not look directly at the source of the beam to avoid any risk.

In normal conditions of use, they are not considered potentially dangerous.
 

And class 2M...

For Class 2M lasers, used in projectors or laser levels, exposure is not dangerous unless you look directly at the beam.

The safety features are therefore the same, as are the risks. 

LS100 Gravotech

Gravotech class 2 lasers

Laser engraving and cutting tables

Laser engraving and cutting tables are largely safe thanks to a door that cannot be opened when the device is in operation. 

No specific authorization is required to use them. 

They can be used in any environment: factory, workshop, front and back office, or store floor.

Discover our laser tables

Class 3 lasers

Class 3 lasers are divided into two distinct sub-categories: class 3R and class 3B (the most dangerous).

These devices are moderately dangerous and can cause injury. Therefore, you must pay close attention to reflective equipment and materials.

Fiber laser orange safety glasses

Class 3R and 3B lasers

Class 3R lasers

Class 3R lasers have a power of between 1 mW and 5 mW and emit in a wavelength range from 302.5 nm to 10.6 µm. To avoid any risk of eye damage, we strongly advise you to wear protective eyewear.
 

Class 3B lasers

Class 3B lasers have a power level of between 5 mW and 500 mW. Direct vision into the beam is therefore very dangerous and can cause burns. When using these lasers, protective eyewear must be worn.

Class 4 lasers

Laser class 4 is dangerous in direct or diffuse vision causing damage to the eyes and the skin and presenting a fire hazard. It is imperative to take strict safety precautions when using these lasers.

Laser safety eyewear sign

Safety precautions

  • Protective eyewear must be worn by all operators and anyone in the vicinity of the laser.
  • Appropriate skin-covering clothing must be worn to prevent burns.
  • You must ensure that the work area is free from flammable particles and well-ventilated to minimize the risk of fire.
Warning laser hazard sign

Exemples of common use

Class 4 lasers are commonly used in a variety of industrial applications:

  • laser cutting,
  • laser marking,
  • laser welding...

These applications demonstrate the efficiency and power of Class 4 lasers while underlining the importance of safety measures to prevent accidents and damage.

Automotive laser marking machines

Gravotech class 4 marking lasers

Lasers that can be integrated into production lines

These lasers can be used:

  • On a column - in which case they must be handled in a secure enclosure, by operators wearing appropriate PPE (Personal Protective Equipment) such as safety goggles.
  • On a production line - in which case safety is ensured by integrating the laser. Capable of communicating with PLCs, these machines are primarily designed for this type of use.

Integrable lasers are used for the permanent marking of DPM codes (Datamatrix, Code 1D, Code 2D..) or text.

Class 4, these machines require no additional equipment to operate, except for their integration.

Discover our integrable lasers
Gravotech information icon without background

Warning
Before using a laser for engraving, marking or cutting, it is crucial to consult an experienced laser professional. This ensures that the chosen laser is suitable for the specific application, and that all appropriate safety measures are in place.

The laser class of your machine indicates how dangerous it is. It's up to each company to put in place the necessary safety devices to ensure the laser marking machine's proper operation and the operator's safety. Want to know more about laser engraving?